I had a brief opportunity to head passed the field at McClellan, previously and Air Force base just outside Sacramento. This wasn’t enough time to have a good look around but more of a recce for a future visit. I knew of the Coast Guard and the Calfire facilities so I was looking to see what else was there that might be worth a future look. There were a few bits and pieces around. One thing that I liked was the collection of P-3 Orions in storage. They were operated by Aero Union on firefighting duties before the company went bust. No one has ought them yet. I grabbed a couple of shots over the fence. I might like to come back here to have a more detailed look around.
Author Archives: Rob
Back at the Hyatt
I wrote previously of a lift that took place at the Hyatt Regency Hotel in Chicago. Erickson undertook this lift with the massively powerful S-64. However, they did not manage to finish off all aspects of the lift and a follow up job was required. Since the largest items had already been dealt with and the remaining items were either light enough for a smaller helicopter or could be broken down into parts that were light enough, the remainder was contracted to Midwest Helicopter with an S-58T.

I was planning to join them on the roof but it turned out that the team contracting the lift had already got one of their guys on a neighboring roof taking some shots and I could join him. This roof was higher and up sun from the majority of the action so a great spot. I gratefully accepted their offer. (I should note that I also tried something new this time. However, it didn’t work out as planned. I should write about it here but I think I will get it working properly before I tell the full story. Everyone prefers a happy ending and I am no exception.)
The lift went well and I got a lot of shots (and some video of which more another day). The same problem as the previous lift affected things with the wind meaning the helicopter was tail on to me most of the time. However, this time it was more than compensated for by the scenic background and chance for some nice wider shots. I was happy with the outcome.
Early Morning City
As you know if you follow this blog, the chance to be on the roof of a building for a helicopter lift is also the chance to get some shots of the city. We get into place well ahead of the actual lift and, while the guys are getting ready to deal with the loads, I have the time to get my gear ready and usually grab some shots of the view. High buildings have good views but not always photogenic ones. When you are above the city, you get a good view of cooling units, satellite dishes and all of the others things architects and building engineers hide on the roof out of sight of most people.
However, all is not bad. Sometimes you just get a great view of the city from an angle that most don’t get. Being on the river opens up more options too. You are not closed in by surrounding structures – and you have a river! Not bad, eh?
Some Long Line Work
It has been a while since I was up on the roof with the Midwest Helicopter team. A couple of jobs came up recently on the same morning and I went along. It was a great morning with lovely winter light and good skies, at least to start out with. Of course, these conditions in the winter also can mean low temperatures. It was 14F on the first job – not the coldest I have experienced on one of these lifts but quite close! However, when benefit of living in Chicago for a number of years is that I do have suitable clothing for cold weather.
The first job was a relatively simple one. The building was not terribly tall, maybe a dozen floors or so, and there were three cooling units going up and one old one coming down. A previous job had been done by the team on this building but this one required some adjustments. The location where the units were to be placed was on the other side of the roof and a lot closer to a far higher building. The normal 100′ line would not suffice and the 300′ option was required. This is a far rarer requirement so Jim, the Chief Pilot, decided to fly it instead of one of the other pilots since he hadn’t any experience with the 300′ line.

I had plenty of space up on the roof to move around to shoot while staying out of the way of the crew. My job is to avoid them and stay out from under the loads. I do think Jim sometimes is playing a game with me as, on this job like some before, I ended up tight in a corner as it seemed like he was aiming for me! In truth I was well clear and he wasn’t chasing me but when you are looking almost straight up at the loads, they do look like they are closer than they really are.
The only disappointment for me was that the wind was coming from the west so the aircraft was tail on for most of the time. Since the light was at its best this early in the morning, that was a shame. However, not a bad start to the day.
And the First Piece is Away!
As I mentioned before, the first piece was free. I hadn’t planned for a time lapse. I had no idea I was going to time my visit for when this happened, nor that it was going to happen so soon. However, I was there with the camera on a tripod so I manually shot a sequence and cut it together. It is short but you get the idea. I left town shortly after this so missed the new section being put in place. I shall hope to be around when the second span is worked on.
Cutting Through the Night
I headed back to the work site later the same day to see how things were progressing. I wanted to know how fast things were moving but I also wanted to see the work at night. The cutting torches they are using provide a great shower of sparks but, during the day, it is hard to make that impression since they are not very conspicuous. If they were cutting at night, I figured the effect would be more pronounced. That certainly was the case.
Moreover, they had got a lot further than I had expected. The section was almost totally cut free. It was now rest on the barge ready to be moved when the final cuts were made. As you can see from above, it wasn’t long before this happened. They really had made swift work of the first stage of the task.
Starting the removal
The start of the bridge replacement program I mentioned here was swift. One of the first things they did after getting the trains shut down was to open the span that wasn’t being worked on. This provided room to move the barges around with their loads without obstruction. Then the team got to work on cutting loose the section that is to be replaced. There was plenty of structure to be cut free first before the main section could be removed. Teams were busy cutting and removing all day. The project is underway around the clock. Some of the shots are in the gallery below.
These Things Are Tiny!
I shouldn’t be so old that I find some of the technological developments amazing but every once in a while you see something that impresses you. I have been shooting with cameras that use compact flash cards for a long time now. The form factor hasn’t changed in all of that time. The SD card was seen as the way ahead but somehow the Compact Flash has always remained ahead of it. The XQD card now seems to be the next step but we will save that for another day.
My cameras have a compact flash and an SD slot. I have SD cards in them as backups if I suddenly need a little extra capacity but they aren’t used much. The Compact Flash has always been faster to write to. I do use them in my GoPro. Recently B&H had a special on cards and, since I am about to buy a new GoPro and it uses the micro SD card, I took the opportunity to pick one up cheaply. These things are small.
In the above picture you see a Compact Flash (16GB) and the adapter for the micro SD to fit in a standard SD slot. Then you see the micro SD in the middle. It is a 32GB card. Am I the only one who thinks that thing is tiny?
Wells Street Bridge Prep
A major engineering activity is underway in the city at the moment. The Chicago River is crossed by many bridges. Most of them are bascule bridges and they are part of a cycle of maintenance with each bridge getting refurbished periodically. Metalwork repair and repainting is usually the order of business but, sometimes, they need more significant work. The Wells Street Bridge is undergoing just such a work program. Part of it is being repaired but some of the metalwork needs replacement.
This bridge is more complex than some. It has two levels with street traffic on the lower level and the “L” on the upper level. Replacement is, therefore, more problematic. Shutting down a line on the “L” is not done lightly. The street traffic is more easily diverted so, having that closed is easier to handle and it has been shut for a while now as the preparation for the repair was underway. The bridge has two spans and they are being done one at a time. The south span is first. They have prepared the section that is remaining and now they are cutting off the rest.
A new span has been constructed offsite. This is floated to the location, the old section is cut off and the new section bolted on. That makes it sound so simple, doesn’t it? It obviously is a little more complex, not least because it has to be done in just over a week including replacing the train tracks and electrical systems. These shots show the site in preparation for the big task. I will provide updates as the job progresses. Sadly, I have to be out of town during some of the work but will show what I can.
Snowy Trees
Unlike last winter, this one has been a bit colder in the Chicago area. It hasn’t been consistently cold but there have been some cold times and we have had a bit of snow. We don’t tend to get too much snow in the city itself. It does happen but usually the areas around the city get hit a lot more than we do. It is easy to forget this but, when we head out to other places, we get a reminder.
A recent trip out to Barrington was one of those times. As we drove along the roads through the country, there was plenty of snow about. Lots of it was attached to the trees and it had clumped together in quite an interesting way. It looked like large cotton balls attached to the branches. Sadly, when you are driving along a road with nowhere to pull off, you can’t easily get a picture.
Once we got to Barrington, though, I saw some trees near the parking lot that looked similar. Nancy headed inside (it was cold so she was no fool) while I wandered across the lot. Just a phone to take the pictures with but you use what you have. The location wasn’t quite as pretty as the roads we had come along but you get an idea of what it was like. The sun was out and the temperature was rising so some of the snow was already melting off the branches so I think I was quite lucky to get what I did.





















