Tag Archives: aircraft

New American Livery – Not That Bad

wpid5626-AU0E7638.jpgHaving heard a lot of comments about people’s views of the new livery American Airlines has adopted, I was reserving judgement until I had seen it myself. When I first saw images online, I was not bowled over with it but I was not appalled as some people seem to have been. Given the boring nature of many liveries these days, I thought it was a little different from the norm and certainly not cause for offense. Of course, there were plenty who thought the exact opposite.

I have now had my first chance to see it for myself and I have to say my opinion is much the same. I was lucky in this instance that I got to photograph it just before the sun went down so it was bathed in some very favorable light. Even so, I think it looked okay. You will make your own decision of course. In time, we will forget this discussion ever took place!

Firefighters

wpid5528-IMG_1437.jpgI had a brief opportunity to head passed the field at McClellan, previously and Air Force base just outside Sacramento. This wasn’t enough time to have a good look around but more of a recce for a future visit. I knew of the Coast Guard and the Calfire facilities so I was looking to see what else was there that might be worth a future look. There were a few bits and pieces around. One thing that I liked was the collection of P-3 Orions in storage. They were operated by Aero Union on firefighting duties before the company went bust. No one has ought them yet. I grabbed a couple of shots over the fence. I might like to come back here to have a more detailed look around.wpid5530-IMG_1441.jpg

Back at the Hyatt

wpid5523-AU0E4830.jpgI wrote previously of a lift that took place at the Hyatt Regency Hotel in Chicago. Erickson undertook this lift with the massively powerful S-64. However, they did not manage to finish off all aspects of the lift and a follow up job was required. Since the largest items had already been dealt with and the remaining items were either light enough for a smaller helicopter or could be broken down into parts that were light enough, the remainder was contracted to Midwest Helicopter with an S-58T.

wpid5525-C59F4047.jpgwpid5537-C59F4279.jpgI was planning to join them on the roof but it turned out that the team contracting the lift had already got one of their guys on a neighboring roof taking some shots and I could join him. This roof was higher and up sun from the majority of the action so a great spot. I gratefully accepted their offer. (I should note that I also tried something new this time. However, it didn’t work out as planned. I should write about it here but I think I will get it working properly before I tell the full story. Everyone prefers a happy ending and I am no exception.)

wpid5532-C59F4248.jpgThe lift went well and I got a lot of shots (and some video of which more another day). The same problem as the previous lift affected things with the wind meaning the helicopter was tail on to me most of the time. However, this time it was more than compensated for by the scenic background and chance for some nice wider shots. I was happy with the outcome.

wpid5539-C59F4298.jpgwpid5535-C59F4260.jpg

Some Long Line Work

wpid5505-C59F3653.jpgIt has been a while since I was up on the roof with the Midwest Helicopter team. A couple of jobs came up recently on the same morning and I went along. It was a great morning with lovely winter light and good skies, at least to start out with. Of course, these conditions in the winter also can mean low temperatures. It was 14F on the first job – not the coldest I have experienced on one of these lifts but quite close! However, when benefit of living in Chicago for a number of years is that I do have suitable clothing for cold weather.

wpid5511-C59F3753.jpgThe first job was a relatively simple one. The building was not terribly tall, maybe a dozen floors or so, and there were three cooling units going up and one old one coming down. A previous job had been done by the team on this building but this one required some adjustments. The location where the units were to be placed was on the other side of the roof and a lot closer to a far higher building. The normal 100′ line would not suffice and the 300′ option was required. This is a far rarer requirement so Jim, the Chief Pilot, decided to fly it instead of one of the other pilots since he hadn’t any experience with the 300′ line.

wpid5509-C59F3729.jpgwpid5507-AU0E4788.jpgI had plenty of space up on the roof to move around to shoot while staying out of the way of the crew. My job is to avoid them and stay out from under the loads. I do think Jim sometimes is playing a game with me as, on this job like some before, I ended up tight in a corner as it seemed like he was aiming for me! In truth I was well clear and he wasn’t chasing me but when you are looking almost straight up at the loads, they do look like they are closer than they really are.

wpid5513-C59F3812.jpgThe only disappointment for me was that the wind was coming from the west so the aircraft was tail on for most of the time. Since the light was at its best this early in the morning, that was a shame. However, not a bad start to the day.

Some Skycrane Footage

The arrival of Erickson in town to carry out a lift was described in a previous post which you can check out here. While I was predominantly shooting stills for this lift, I continue to grab some video footage when the opportunity presents itself. I have put together a short video of the lift and you can see it below.

The Mighty Skycrane

wpid5424-C59F3254.jpgRegular readers of this blog will know how much I enjoy shooting helicopter lift operations in the city. Midwest Helicopters are the local operator and a great bunch of people who have helped me out lots of times. This lift proved to be one of those times although it wasn’t them doing the job. They had finished a job in the city on a very snowy morning and I was exchanging messages with their Chief Pilot when he mentioned that Erickson were in town for a job.

wpid5418-AU0E4118.jpgErickson specialize in lifting very heavy equipment. Midwest fly Sikorsky S-58T aircraft which are good for about 4,500lbs. Construction Helicopters in Michigan (who have made appearances on this blog too) have S-58T aircraft as well but tend to bring S-61Ns to Chicago since they have a higher capacity of up to 8,000lbs so can lift loads too heavy for the local guys. Erickson are a different story altogether. They build and operate the S-64 which can lift a whopping 25,000lbs. This is obviously way above the capabilities of the other operators and way more than most jobs can justify.

wpid5422-C59F3220.jpgConsequently, an appearance by Erickson in town is not so common and is worthy of a look. Moreover, they were lifting just across the river from my home so how could I not go? I have worked on site with Erickson before and so contemplated calling to arrange to be there for this job. However, I was suffering with a bit of a cold and the weather forecast did not look promising so I decided to not try and be on site but to shoot from outside the safety perimeter. Since the lift was alongside the river, getting good shots should not prove to be difficult.

wpid5426-C59F3514.jpgCome the morning of the lift, visibility was terrible and snow was falling hard. All this could be seen from my window so I didn’t need to be out on the ground. Instead, I got ready at a leisurely pace and grabbed a couple of cameras when the weather started to improve. The streets around the Hyatt Regency hotel (the location of the job) had been closed for a while which I found curious since they obviously weren’t going to start until the weather cleared. Lifting in poor conditions is tricky enough but getting to the site in the first place is more of a problem.

wpid5420-AU0E4203.jpgAs the weather started to clear, I talked to one of the crews maiming the perimeter and he confirmed that they had launched and were on their way, Time to wait. The S-64 is a big beast and you don’t have any questions when it arrives. It’s sound travels well and you know it is coming. Fortunately, there were a bunch of loads to go up (and some to come down too), so there was plenty of opportunity to shoot at different locations. Moving across the river provided some alternative views of the lift. Meanwhile, the weather was continuing to improve until it was actually sunny. Sadly, the lifting location was always in shade but you can’t have everything. Watching the downwash blow the snow around both on the ground and on the roof was quite amusing.

wpid5428-C59F3612.jpgThe lift seemed to go well and I covered everything I was after. I also got some video which I shall share later.

First Crossing Shot of the Season

wpid5346-AU0E3025.jpgJust a quick joke.  I was out shooting wildlife when there were a couple of airliners overhead.  It is a bit early in the year for airshows but I guess this might count as my first crossing shot of two jets for the year.  Hopefully there will be a few more!

Head on Big Boys

wpid5269-AU0E2456.jpgMy day out shooting with Hayman was mainly an aviation themed event.  One of the things I was interested in was looking for something more head on as the heavier jets launch out of SFO.  Most aircraft depart off 01 and head out across the bay.  however, the heavier widebodies launch off 28 and climb out towards South San Francisco.  A head on shot of them coming off the runway is what i really want.

wpid5271-AU0E2481.jpgHayman had a location which was halfway to what we wanted.  You are a bit further from the airport and so they rise out of the surrounding landscape rather than seeing them come off the runway itself.  The location has a lot of promise.  Sadly, on this day the weather was not nice and, as the day was moving along, what light there was after the clouds had taken their share was fading fast.  however, it was rather fun to see the 747s and A380 climbing out over us.  Definitely something to try again some time.  As for the runway shot, we shall have to keep exploring to find the right spot for that!

wpid5273-AU0E2539.jpg

Cloudy SFO

wpid5264-AU0E2268.jpgI was in the Bay Area visiting my friend Hayman, a fellow ISAP member, so it wasn’t hard to predict what we would do with the day.  we actually decided to stay locally checking out whatever SFO had to offer.  We did not have the best run of luck.  First the weather was a bit crappy so the photo opportunities were going to be a bit more limited.  However, sometimes, bad weather can give something different so we weren’t to be deterred.

wpid5262-AU0E2230.jpgOne location we had in mind was crowded and we couldn’t even park.  This coincided with the arrival of the Lufthansa A380 so we already had missed one opportunity.  Oh well.  More strange was that everything was departing from 10 as we approached the airport.  This is a very strange procedure for SFO, particularly given the wind was calm so not forcing something different.  This could have given us some unusual departure shots.  Just as we approached, they reverted to normal operations.  See a pattern developing?

wpid5266-AU0E2446.jpgWe still had some fun and got a few shots.  As you can see, nothing terribly special from me.  Hayman may have done better.  None of these will be seen beyond this post but a day out with a friend shooting aircraft is still better than a lot of the alternatives!  Cheers Hayman.

 

A Rare Beast

wpid5121-C59F4307.jpgOver recent years I have made many trips that take me through Baltimore Washington International airport or BWI. It is the easiest route for me when heading to Washington DC. One of the nice things about BWI is that Northrop Grumman have a facility there that focuses on radar development. As part of this facility, they have a flight test department that makes use of some interesting aircraft. A few times I have seen one of them on the move while I was in the airport but normally I did not have a camera to hand to catch them. However, one time I did get lucky.

wpid5119-C59F4306.jpg

I managed to see their BAC 1-11 taxiing out for departure. This is an aircraft that has received a number of modifications for airborne testing of radar systems. While it is an old airframe and there aren’t many of them in service any more, it obviously still performs the required role well and they continue to operate it. It taxied past the terminal and then departed across in front of us. Since it is a bit dated, the noise levels were apparent even inside the terminal. However, it was fun to see it in action. A recent trip also spotted a smokey trail on approach. Sure enough, it was back. Sadly, no camera to hand that time!wpid5117-C59F4302.jpg