But of course it is! This Pitts lives at Arlington and I got to get some time watching its owner doing some pattern work. He ran it up near where I was prior to getting airborne and then proceeded to fly around the circuit for a while. Generally the approaches were a continuous turning descent which made for some top side views. Of course, the Pitts is not a large plane so, even with a long lens, it was still a bit small in the viewfinder but enough to get some reasonable shots.
Amazon is finishing up a huge fulfillment center up in Arlington WA. I understand it will be over 600k sq ft of space. The structure is approaching completion and they needed to install the air handler units on the roof. The most efficient way to do this is by helicopter so, after my many times with helicopter lifts in Chicago, I was looking forward to this happening.
They contracted with Croman Helicopters. This is an operation out of Oregon, and they do a lot of firefighting work. The lifting is. A smaller part of their business. However, it is still a good line for them. They brought two helicopters up for the lift. One was an Astar (which might have been theirs or might have been chartered since it had a different name on it) and the other was one of their S-61s. I’ve shot S-61s a couple of times but not often, so this was something I was looking forward to. They came up ahead of the lift and parked on the main ramp at Arlington. Conditions were pretty good and I was able to get some shots of the airframe.
Most of the pictures I have seen of their S-61s have them in a yellow scheme but this one was a dark grey. It was a nice-looking finish but a bit tough if the lighting wasn’t great. The S-61 has plenty of rivets which make for some cool textures in the right light. It was also fitted with a good bubble window for monitoring the load along with some duplicate engine gauges on the outside in the line of sight of the lifting pilot. I had fingers crossed for good conditions to get it in flight…
I didn’t notice this at the time but, while working my way through some shots of the Alice taxi trials, I realized that the port wing is tufted. Tufting is a simple but effective way to see how the flow is behaving on a surface. It does need to be recorded, though, so I then looked for the camera and saw the blister up on the side of the fuselage that must contain the camera. I don’t know whether they have been paying attention to the flow visualization while doing taxi trials or not. They have had flaps down as well as up but, without the nose off the ground, maybe there has not been anything significant to see. They sure aren’t saying and have other things to address after some of the testing issues.
Arlington had a couple of different visitors. They were both TwinStars and they arrived within a few minutes of each other. The first TwinStar showed up and I got some shots. When I saw a TwinStar on the approach, I assumed it was the same aircraft back around again. I figured I would drop the shuttle speed down a bit to vary things. Consequently, I was a bit annoyed when I realized the airframe in the viewfinder was a different one. I had to cross my fingers that I hadn’t blown it by going with the low shutter speed. Fortunately, a few of the shots were okay. Phew…
I went up to Arlington one Sunday to see if Eviation was up to anything. Their hangars were closed up but I did see a Piper Pawnee in an open hangar as I nosed around and I hoped it would be in action. It is used by the local gliding club and, sure enough, it was going to get some use. Ahead of any towing activities, the pilot took it up to get some circuits in. I took a few shots of it as it hit the pattern. The Pawnee is a really strange looking plane. Very functional but not too elegant.
The testing of the Eviation Alice continues. My first post on this was when they tried to do some high speed taxi trials but didn’t manage to get the plane going. However, they have been making more progress since. I managed to get up there when they were planning some more taxi trials. I was hoping for some more fast work which they delivered. Not fast enough to get the nose wheel off yet but progress all the same.
A few photographers were out to see what occurred. The test team did not seem too happy about the level of interest. I think they would prefer to get early testing work done without the world watching. They did have their own multimedia team, of course. Various cameras were doing the official recording and some drone work was done as they carried out the trials. A NOTAM for the UAV was in place for several days. I went with stills and video and put some stuff together for GAR and here is some of what I got. Let’s hope to get more as they progress.
Arlington’s air show included a brief performance by the replica of the Spirit of St Louis. I have only shot the plane once before and understand it is up for sale so it might not be around for much longer. A chance to get it again was welcome and, since it was an evening air show, maybe some good light would be on the cards. Sadly, it was pretty late by the time they got ready to go and the evening was overcast anyway. Instead of good light, it was barely any light.
Even so, you go with what you have. They taxi out passed our location which is nice to have. Takeoff was away from us so they were a bit distant by the time they were airborne but still not too bad. Some passes over the field and then a landing form the other direction and that was it. They did taxi back in our direction of course. Nice to see it again but, oh to get it in nice light.
Arlington is the current home of a replica of the Ryan Monoplane flown by Charles Lindbergh across the Atlantic. This is a detailed replica built over many years by a guy called Mike Norman. It has flown a few times and they are increasing the hours on the airframe prior to taking it further afield. I hadn’t seen it before but my friend, Bob, advised that it was due to fly on a recent Sunday morning. The weather was looking nice if a little warm (heat haze) so I made the trip up to Arlington early on the Sunday.
They taxied out a little later than planned but not by much and certainly not when you are working with an experimental airframe. They took off to the north and flew a couple of circuits. We were a bit distant from it but not too bad. I figured I would head to the approach end for the next circuit. I got there just as they were on short final so too late to get a shot but I figured I would get the next one when they climbed out again. However, the next approach turned out to be for the cross runway. They flew close by while downwind but I was on the wrong side for the light when they were on final.
On the next climb out they left the circuit to fly up towards Bellingham. This left a problem. By the time that they were due back, the light would almost definitely be tail on down the runway. I discussed with Bob the options and we decided to go to the south of the runway and hope they came that way. As it was, they arrived back at exactly the time the light was aligned with the runway so the worst of options. However, we were not far from the threshold and had a mountain backdrop on final approach so not too bad. It is a lovely looking replica. I hope to see it fly again, maybe in nice evening light. I suspect it is easier to fly when the air is a bit less bumpy!
