Tag Archives: photo

Early Morning City

wpid5515-AU0E4822.jpgAs you know if you follow this blog, the chance to be on the roof of a building for a helicopter lift is also the chance to get some shots of the city. We get into place well ahead of the actual lift and, while the guys are getting ready to deal with the loads, I have the time to get my gear ready and usually grab some shots of the view. High buildings have good views but not always photogenic ones. When you are above the city, you get a good view of cooling units, satellite dishes and all of the others things architects and building engineers hide on the roof out of sight of most people.

wpid5519-C59F3887.jpgHowever, all is not bad. Sometimes you just get a great view of the city from an angle that most don’t get. Being on the river opens up more options too. You are not closed in by surrounding structures – and you have a river! Not bad, eh?wpid5517-C59F3884.jpg

Some Long Line Work

wpid5505-C59F3653.jpgIt has been a while since I was up on the roof with the Midwest Helicopter team. A couple of jobs came up recently on the same morning and I went along. It was a great morning with lovely winter light and good skies, at least to start out with. Of course, these conditions in the winter also can mean low temperatures. It was 14F on the first job – not the coldest I have experienced on one of these lifts but quite close! However, when benefit of living in Chicago for a number of years is that I do have suitable clothing for cold weather.

wpid5511-C59F3753.jpgThe first job was a relatively simple one. The building was not terribly tall, maybe a dozen floors or so, and there were three cooling units going up and one old one coming down. A previous job had been done by the team on this building but this one required some adjustments. The location where the units were to be placed was on the other side of the roof and a lot closer to a far higher building. The normal 100′ line would not suffice and the 300′ option was required. This is a far rarer requirement so Jim, the Chief Pilot, decided to fly it instead of one of the other pilots since he hadn’t any experience with the 300′ line.

wpid5509-C59F3729.jpgwpid5507-AU0E4788.jpgI had plenty of space up on the roof to move around to shoot while staying out of the way of the crew. My job is to avoid them and stay out from under the loads. I do think Jim sometimes is playing a game with me as, on this job like some before, I ended up tight in a corner as it seemed like he was aiming for me! In truth I was well clear and he wasn’t chasing me but when you are looking almost straight up at the loads, they do look like they are closer than they really are.

wpid5513-C59F3812.jpgThe only disappointment for me was that the wind was coming from the west so the aircraft was tail on for most of the time. Since the light was at its best this early in the morning, that was a shame. However, not a bad start to the day.

And the First Piece is Away!

As I mentioned before, the first piece was free.  I hadn’t planned for a time lapse.  I had no idea I was going to time my visit for when this happened, nor that it was going to happen so soon.  However, I was there with the camera on a tripod so I manually shot a sequence and cut it together.  It is short but you get the idea.  I left town shortly after this so missed the new section being put in place.  I shall hope to be around when the second span is worked on.

Cutting Through the Night

wpid5756-AU0E8296.jpgI headed back to the work site later the same day to see how things were progressing.  I wanted to know how fast things were moving but I also wanted to see the work at night.  The cutting torches they are using provide a great shower of sparks but, during the day, it is hard to make that impression since they are not very conspicuous.  If they were cutting at night, I figured the effect would be more pronounced.  That certainly was the case.

Moreover, they had got a lot further than I had expected.  The section was almost totally cut free.  It was now rest on the barge ready to be moved when the final cuts were made.  As you can see from above, it wasn’t long before this happened.  They really had made swift work of the first stage of the task.

Starting the removal

wpid5733-AU0E8100.jpgThe start of the bridge replacement program I mentioned here was swift.  One of the first things they did after getting the trains shut down was to open the span that wasn’t being worked on.  This provided room to move the barges around with their loads without obstruction.  Then the team got to work on cutting loose the section that is to be replaced.  There was plenty of structure to be cut free first before the main section could be removed.  Teams were busy cutting and removing all day.  The project is underway around the clock.  Some of the shots are in the gallery below.

Wells Street Bridge Prep

wpid5731-AU0E8097.jpgA major engineering activity is underway in the city at the moment.  The Chicago River is crossed by many bridges.  Most of them are bascule bridges and they are part of a cycle of maintenance with each bridge getting refurbished periodically.  Metalwork repair and repainting is usually the order of business but, sometimes, they need more significant work.  The Wells Street Bridge is undergoing just such a work program.  Part of it is being repaired but some of the metalwork needs replacement.

wpid5729-AU0E8085.jpgThis bridge is more complex than some.  It has two levels with street traffic on the lower level and the “L” on the upper level.  Replacement is, therefore, more problematic.  Shutting down a line on the “L” is not done lightly.  The street traffic is more easily diverted so, having that closed is easier to handle and it has been shut for a while now as the preparation for the repair was underway.  The bridge has two spans and they are being done one at a time.  The south span is first.  They have prepared the section that is remaining and now they are cutting off the rest.

wpid5727-AU0E8070.jpgA new span has been constructed offsite.  This is floated to the location, the old section is cut off and the new section bolted on.  That makes it sound so simple, doesn’t it?  It obviously is a little more complex, not least because it has to be done in just over a week including replacing the train tracks and electrical systems.  These shots show the site in preparation for the big task.  I will provide updates as the job progresses.  Sadly, I have to be out of town during some of the work but will show what I can.

 

Snowy Trees

wpid5449-IMG_1422.jpgUnlike last winter, this one has been a bit colder in the Chicago area. It hasn’t been consistently cold but there have been some cold times and we have had a bit of snow. We don’t tend to get too much snow in the city itself. It does happen but usually the areas around the city get hit a lot more than we do. It is easy to forget this but, when we head out to other places, we get a reminder.

wpid5453-IMG_1427.jpgA recent trip out to Barrington was one of those times. As we drove along the roads through the country, there was plenty of snow about. Lots of it was attached to the trees and it had clumped together in quite an interesting way. It looked like large cotton balls attached to the branches. Sadly, when you are driving along a road with nowhere to pull off, you can’t easily get a picture.

wpid5451-IMG_1424.jpgOnce we got to Barrington, though, I saw some trees near the parking lot that looked similar. Nancy headed inside (it was cold so she was no fool) while I wandered across the lot. Just a phone to take the pictures with but you use what you have. The location wasn’t quite as pretty as the roads we had come along but you get an idea of what it was like. The sun was out and the temperature was rising so some of the snow was already melting off the branches so I think I was quite lucky to get what I did.

Old Pandas

wpid5316-09.jpgWe were talking about baby pandas at home the other day. Apparently, San Diego zoo has a new baby panda. This reminded me about a trip we made to the zoo there in 2002. They had a new panda on display at that time. I got a couple of shots of it on film – hence the fact that there are only a few shots as opposed to a huge bunch of them! Anyway, this young panda was happily playing in its enclosure while large crowds gathered to watch.

wpid5314-08.jpgI was fascinated by the bear’s interest in trying to hurt itself. It seemed constantly to be hanging from a branch upside down with a very tenuous grip on the wood. It looked like an accident was inevitable – especially since young animals haven’t always learned the extent of their capabilities. Since all pandas are owned by the Chinese government, I was imagining a fall and injury causing a diplomatic incident. Of course, nothing happened. Meanwhile, I dug out the old shots and here they are.

wpid5312-07.jpg

Gulls During the Break

wpid5341-AU0E4009.jpgThe eagles and the ducks got our attention but the gulls were also around on the Mississippi.  Gulls don’t tend to get much interest but, if you have been standing around for a while waiting for something to happen, the gulls start to be a bit more interesting.  Is this the bird shooting equivalent of going ugly early?  They even did some diving for us close in so I guess I should be a bit more grateful.  We put it down to tracking practice and we will stick with that I think.wpid5339-AU0E3882.jpg

 

Ducks in Flight

wpid5335-AU0E3191.jpgThe eagle trip to the Mississippi provided plenty of times when the big birds were either elsewhere or just sitting in the trees wondering what to do next.  This meant either doing nothing ourselves of having a practice on the other wildlife passing by.  There were a few ducks in flight.  Since these are small targets, they have to be reasonably close to make a shot even worth trying.  However, a couple of times they came close so why not?

wpid5337-AU0E4103.jpg