Tag Archives: airliner

Dropping the Shutter Speed in Bad Light

My cloudy Vancouver shoot also gave me the chance to play around with some lower shutter speeds. I have done this for the turboprops before but this time I decided to play with some of the jets. A really low shuttle speed can blur out the background and give a nice impression of movement but it is a problematic shot to make. You don’t want to do it on something that you are keen to get in case you get nothing! It is also something that results in very small apertures if there is much light which can make for a lot of dust spotting in post! A cloudy evening is a good time to try and a bunch of boring regular jets are good targets for a trial!

FedEx Testing and Delivery

Leave a Reply

Summer evenings can be a good time to visit Paine Field as flying seems to be busy and the light is often quite nice. On two separate visits, I saw this FedEx 777F flying. The first time it was on some acceptance flights and it flew an approach followed by a low go around. The gear doors had been blown down prior to this approach and the RAT was deployed. It then flew a pattern and landed.

Next time I saw it, it was heading off to Memphis on its delivery flight. They seemed to have a few issues with the transponder prior to departure which was fine for me as it delayed them until the light was a bit nicer. Not sure I would be so happy to take my new plane with a snag though! Memphis when empty is a piece of cake for a 777F so it made it off the ground pretty speedily.

Stacked Up the YVR Approach

Leave a Reply

Getting a good angle on jets lined up on the approach is a combination of luck with where you can stand and the timing of the arrivals to be in sequence when you can get them all together. It is also a question of whether you have the right focal length to catch them together but not so much that one is out of frame. I played with this a bit at YVR. Sometimes there would be a jet on the parallel approach too but combining the lot was more luck than judgement.

777X Taxi Trials

Leave a Reply

I had a lucky break one evening when I headed up to Paine Field for one thing, only to discover that the 777-9 development airframe was undergoing taxi tests. I got there to see it on the Boeing ramp with cooling fans running to cools the brakes. I was worried that I may have missed all of the action but this was not the case. They had two more taxi trials that they ran before wrapping up. Each time they would have a brake cooling session with the fans.

The engines are a problem at the moment so they don’t have a flight clearance. That means that the taxi trials will not get too fast. High speed taxi trials require a flight clearance to be available should the aircraft get airborne by accident. These were not going to do anything like that so no lifting the nose wheel. Just accelerate down the runway, gather data points and apply the brakes. I wrote a piece for GAR which is here that covered the trial and there is some video below which includes a head on view of the folding wingtips being lowered into the flight position.

Boeing 2707 Mockup

Leave a Reply

An online discussion I was involved in recently revolved around supersonic transports. While the TU-144 and Concorde were the main focus, the Boeing 2707 also came up. I had seen the front fuselage mockup of this when it was at the Hiller Museum in San Carlos. I realized I didn’t have any good photos of it and was a touch annoyed. Looking up the story of the mockup, I found it was now at the Museum of Flight Restoration Facility at Paine Field.

I hadn’t visited the facility since moving up here so figured a visit was in order. The mockup is easily accessible in the main part of the hangar. However, it is rather big and so only fits in with the nose section removed. I had a chat with the docent and he advised that it was unlikely to be moved to the main museum building given the amount of space it takes up. I assume it will stay where it is for the foreseeable future. The rest of the mockup was destroyed long ago so it is great that this piece has survived as a relic of a long gone program.

How Slow Can I Go With the Turboprops?

Leave a Reply

Shooting Dash 8s and Q400s at YVR is not going to be particularly interesting so I was able to spend some time playing with shutter speeds progressively lower and lower. Shooting very low shutter speeds on the 500mm handheld is a bit of a crapshoot but you never know what you might get. Besides, the evening light meant it wasn’t so bright that you were at ridiculous apertures with the associated endless dust spotting!

I was quite prepared to have got absolutely nothing from these shots. However, either my luck was good or my technique has improved – I think we both know which it is – and I got a few sharp ones with plenty of prop blur and background blur combined. Background blur always makes for a more interesting shot. However, when you want to make sure you get the shot, you aren’t always willing to risk it. Having something that is not a make or break shot means you can have a lot more leeway for experimentation.

A DHL Delivery But to Them Rather Than By Them

Leave a Reply

A lot of freighters come out of Everett these days. All 747s are now freighters as are the 767s. The 777 passenger variants are a regular feature but there is quite a demand for 777Fs too. I saw one go to DHL not long ago. They have some aircraft already in service but they are in a hybrid scheme. This was the first one to be delivered in the full DHL yellow colors. It taxied out and went to the other end of the field for a northerly departure which meant we got a good view of it airborne. The short delivery flight across the US meant it was rather light so it got airborne quickly and was a long way up by the time it got to us again!

Lots of Max Jets in Storage

Leave a Reply

The grounding of the 737 Max fleet has resulted in plenty of parked jets. I have shown them at Paine Field but Boeing Field seems to be a big storage location. The employee parking lot has been turned into a 737 parking lot. I have seen jets over there before either awaiting engines or from customers that can’t pay but nothing on this scale.

I took a trip to South Park so I could walk across the bridge and get a good view down into the storage area. I made a rough count and think there were probably over fifty jets stored there. While Boeing cut the production rate after the grounding, they only took it down to 42 a month so jets are still coming out at a prodigious rate. This area is full so, aside from Paine Field and Renton, I believe they are flying them to other storage locations.

Reverser Close Up

Leave a Reply

When you get lots of similar jets arriving, you can mess around a bit. The 500mm was far too long for the touchdown shots for most aircraft but, when you are getting a bunch of Air Canada A320s, no harm in cropping in really tight on some of them. The CFM-56 reversers are a bucket type so they splay out from the nacelle. With the evening light, you can see lots of detail in the structure. I played with a similar effect on some of the other jets too.

Fatigue 777X in the Test Frame

Leave a Reply

Having seen the fatigue test 777X emerged from the production hangars (as I covered in this post), I assumed it had moved to the test area. I once made a drive around the back of the factory at Everett to see some of the discarded airframe structures that they have stored once they are finished with. I wrote about that in this post. The fatigue test area is in the same place so I thought a drive around was a good idea. Sure enough, the 777X was in the fatigue test rig. I guess it will be there for quite a while as they push and pull it to simulate many cycles of loading and see whether the structure has any long term issues to be addressed.