Tag Archives: sikorsky

Erickson Flashback

wpid9180-C59F2199.jpgI was recently looking back through a few of the previous posts and came across some images of Erickson Aircrane at work in Chicago with their S64 Skycranes.  I was thinking about the various times I had worked with these guys and it occurred to me that several of those lifts had taken place before I started the blog.  Therefore, today is a gratuitous chance to look at some older helicopter shots.

wpid9182-C59F2205.jpgThe guys at Erickson have carried out many lifts in the Chicago area.  On one occasion, they did two lifts in one day on opposite sides of the city.  The first was down near Hyde Park with some equipment being lifted onto a residential block.  The loads were lifted in a park area in front of the building.  Lots of trees were in this park and the Skycrane did an excellent job of finding the weakest and dead limbs.  By the end of the job, the ground was covered in dead wood!

wpid9192-IMG_3012.jpgThe second lift was in Oak Park and was from a garage structure up to the roof of the building.  however, next to the garage was an older building with a wooden roof and balconies which had lots of stuff stored on them.  After the morning, we were rather worried about how much stuff would be damaged.  Amazingly, the gentle breeze from the street made the downdraft totally benign and the building was unharmed.  Hope you like the shots.

Merchandise Mart video

In a previous post I showed some images I took at the Midwest Helicopters lifting job at the Merchandise Mart.  As is normal for me these days, I also took the time to get a bunch of video and, finally, I have got around to editing this.  I wanted to focus a little more on the guys working on the roof rather than just the helicopter operations.  Of course, there is still plenty of footage of the flying too!  I hope you enjoy.

Merchandise Mart

wpid6502-AU0E5564.jpgI know what you are thinking.  It has been a long time and no helicopter photos Rob!  You are right, it has been too long.  Fortunately, I can rectify the situation.  The good people at Midwest Helicopters had a very intensive project recently.  The Merchandise Mart in Chicago was the project in question.  They are installing a series of new chiller units on the roof of the building.  These are big units – too large for the Midwest helicopters to lift as it happens.  However, before they go up, there is plenty of work to be done.

wpid6509-C59F6677.jpgBig chiller units need to be mounted to something and getting the structural steelwork up on the roof is no small task.  It needed over 180 lifts to complete the job.  It was planned for two possible days with the whole day being booked for each occasion to maximize what could be done.  Flying the helicopter all day was intensive for the aircraft and required two pilots to alternate in order to avoid getting exhausted.

wpid6497-C59F6467.jpgI got myself up on to the roof of the Mart for the job.  The Mart is a huge building.  It used to be the largest floor space building in the world before the Pentagon was built.  It might still be second (and, if I was diligent, I could probably look that up to confirm it but we know that isn’t happening while I am in mid-story).  The roof is a big space and there were two separate areas where work was going to be done.

wpid6499-AU0E5532.jpgMounting points on the roof had been installed in advance.  The task on the day was to lift each piece of steel to the roof and bolt it into place.  The next would follow and the frameworks for mounting the chillers would gradually come into place as the ironworkers bolted each new piece to the previous pieces.  (The chillers will follow in a few weeks when Construction Helicopters come to town and I hope to cover that too.)  Each pick went pretty quickly.  As the new piece came into place, the guys on the roof grabbed it and bolted it into place.

wpid6517-AU0E5710.jpgThe line would be released and the helicopter would go down for the next piece while the guys finished bolting the piece into place and preparing for the next section.  This was a continuous process as long as the helicopter had fuel.  Given how warm and sunny it was, the black-painted roof was a hot place to be and the guys were working hard.  I was glad to only be photographing the whole thing!

wpid6519-AU0E5771.jpgAfter the helicopter left for the first refueling, I headed down from the roof.  I had other things to be done that day and headed off.  My original plan had been to get some shots from the ground on the second day.  A lot of the steel was being stored on a barge on the river so getting some shots of that being lifted to the roof was the plan.

wpid6512-AU0E5632.jpgHowever, the team was super-efficient and completed the whole job in the one day.  This was a great success for them and, while they were exhausted at the end of it, I am sure they were very pleased with the result.  Unfortunately, with no second day, I missed out on getting the other shots I had planned.  Oh well, there is always another day.

Back at the Hyatt

wpid5523-AU0E4830.jpgI wrote previously of a lift that took place at the Hyatt Regency Hotel in Chicago. Erickson undertook this lift with the massively powerful S-64. However, they did not manage to finish off all aspects of the lift and a follow up job was required. Since the largest items had already been dealt with and the remaining items were either light enough for a smaller helicopter or could be broken down into parts that were light enough, the remainder was contracted to Midwest Helicopter with an S-58T.

wpid5525-C59F4047.jpgwpid5537-C59F4279.jpgI was planning to join them on the roof but it turned out that the team contracting the lift had already got one of their guys on a neighboring roof taking some shots and I could join him. This roof was higher and up sun from the majority of the action so a great spot. I gratefully accepted their offer. (I should note that I also tried something new this time. However, it didn’t work out as planned. I should write about it here but I think I will get it working properly before I tell the full story. Everyone prefers a happy ending and I am no exception.)

wpid5532-C59F4248.jpgThe lift went well and I got a lot of shots (and some video of which more another day). The same problem as the previous lift affected things with the wind meaning the helicopter was tail on to me most of the time. However, this time it was more than compensated for by the scenic background and chance for some nice wider shots. I was happy with the outcome.

wpid5539-C59F4298.jpgwpid5535-C59F4260.jpg

Some Long Line Work

wpid5505-C59F3653.jpgIt has been a while since I was up on the roof with the Midwest Helicopter team. A couple of jobs came up recently on the same morning and I went along. It was a great morning with lovely winter light and good skies, at least to start out with. Of course, these conditions in the winter also can mean low temperatures. It was 14F on the first job – not the coldest I have experienced on one of these lifts but quite close! However, when benefit of living in Chicago for a number of years is that I do have suitable clothing for cold weather.

wpid5511-C59F3753.jpgThe first job was a relatively simple one. The building was not terribly tall, maybe a dozen floors or so, and there were three cooling units going up and one old one coming down. A previous job had been done by the team on this building but this one required some adjustments. The location where the units were to be placed was on the other side of the roof and a lot closer to a far higher building. The normal 100′ line would not suffice and the 300′ option was required. This is a far rarer requirement so Jim, the Chief Pilot, decided to fly it instead of one of the other pilots since he hadn’t any experience with the 300′ line.

wpid5509-C59F3729.jpgwpid5507-AU0E4788.jpgI had plenty of space up on the roof to move around to shoot while staying out of the way of the crew. My job is to avoid them and stay out from under the loads. I do think Jim sometimes is playing a game with me as, on this job like some before, I ended up tight in a corner as it seemed like he was aiming for me! In truth I was well clear and he wasn’t chasing me but when you are looking almost straight up at the loads, they do look like they are closer than they really are.

wpid5513-C59F3812.jpgThe only disappointment for me was that the wind was coming from the west so the aircraft was tail on for most of the time. Since the light was at its best this early in the morning, that was a shame. However, not a bad start to the day.

Some Skycrane Footage

The arrival of Erickson in town to carry out a lift was described in a previous post which you can check out here. While I was predominantly shooting stills for this lift, I continue to grab some video footage when the opportunity presents itself. I have put together a short video of the lift and you can see it below.

The Mighty Skycrane

wpid5424-C59F3254.jpgRegular readers of this blog will know how much I enjoy shooting helicopter lift operations in the city. Midwest Helicopters are the local operator and a great bunch of people who have helped me out lots of times. This lift proved to be one of those times although it wasn’t them doing the job. They had finished a job in the city on a very snowy morning and I was exchanging messages with their Chief Pilot when he mentioned that Erickson were in town for a job.

wpid5418-AU0E4118.jpgErickson specialize in lifting very heavy equipment. Midwest fly Sikorsky S-58T aircraft which are good for about 4,500lbs. Construction Helicopters in Michigan (who have made appearances on this blog too) have S-58T aircraft as well but tend to bring S-61Ns to Chicago since they have a higher capacity of up to 8,000lbs so can lift loads too heavy for the local guys. Erickson are a different story altogether. They build and operate the S-64 which can lift a whopping 25,000lbs. This is obviously way above the capabilities of the other operators and way more than most jobs can justify.

wpid5422-C59F3220.jpgConsequently, an appearance by Erickson in town is not so common and is worthy of a look. Moreover, they were lifting just across the river from my home so how could I not go? I have worked on site with Erickson before and so contemplated calling to arrange to be there for this job. However, I was suffering with a bit of a cold and the weather forecast did not look promising so I decided to not try and be on site but to shoot from outside the safety perimeter. Since the lift was alongside the river, getting good shots should not prove to be difficult.

wpid5426-C59F3514.jpgCome the morning of the lift, visibility was terrible and snow was falling hard. All this could be seen from my window so I didn’t need to be out on the ground. Instead, I got ready at a leisurely pace and grabbed a couple of cameras when the weather started to improve. The streets around the Hyatt Regency hotel (the location of the job) had been closed for a while which I found curious since they obviously weren’t going to start until the weather cleared. Lifting in poor conditions is tricky enough but getting to the site in the first place is more of a problem.

wpid5420-AU0E4203.jpgAs the weather started to clear, I talked to one of the crews maiming the perimeter and he confirmed that they had launched and were on their way, Time to wait. The S-64 is a big beast and you don’t have any questions when it arrives. It’s sound travels well and you know it is coming. Fortunately, there were a bunch of loads to go up (and some to come down too), so there was plenty of opportunity to shoot at different locations. Moving across the river provided some alternative views of the lift. Meanwhile, the weather was continuing to improve until it was actually sunny. Sadly, the lifting location was always in shade but you can’t have everything. Watching the downwash blow the snow around both on the ground and on the roof was quite amusing.

wpid5428-C59F3612.jpgThe lift seemed to go well and I covered everything I was after. I also got some video which I shall share later.

Hello Again Marine One

It wasn’t long ago that I made a trip out to get some shots of the VH-3D helicopters that operate as presidential transports and are known as Marine One when the President is aboard.  You can read about that here.

It turns out I was going to get a second chance.  As I drove back up to DuPage airport after shooting Fifi on the approach, I noticed a selection of nice looking helicopters parked up between the hangars.  A presidential movement was planned and the aircraft were operating from DuPage.  With the TFR being published, we knew they would be heading out early in the afternoon.

Sure enough, in due course the helicopters came into view.  There were the two VH-3Ds along with three CH-46s in support – two of which were in the glossy green finish and one in standard gray.  They taxied out in line and lined up on the taxiway.  Then they lifted in unison and departed towards the city.  It was very cool to watch.

A while later I was off the field again shooting Fifi taking off when a couple of the CH-46s came back.  I was pretty disappointed to miss their arrival but I got the shot I was there for.  When I got back to the field, I was walking across the apron when I met one of the HMX-1 crew-members.  I told him how disappointed I was to have missed their return.  Not to worry.  He told me two more would be back in about ten minutes.  Sure enough, in they came.  What a great break to get them when I had no idea that they would be there.