Tag Archives: Illinois

Getting up someone’s nose

wpid5616-AU0E6429.jpgI have shot many times at O’Hare over the years.  There are a few locations that provide opportunities but they do depend on the time of day and the approaches the jets are making.  I was out there recently and wanted to try something different.  I didn’t know how well it would work out but wanted to experiment.  I checked out what was due in and found a time in the schedule when nothing unusual was coming in.  Without the need to make sure I got something that was uncommon, I could risk not getting anything at all for a while.

wpid5618-AU0E6481.jpgwpid5620-C59F4692.jpgI wanted to get more directly under the approach path.  This is something that I have done before at Washington National but I have had less success at O’Hare.  I went out a little further on the approach.  The jets were a little higher but I wanted to see what I could get.  You end up with both a slightly more head on shot and also get to look right up as they pass overhead.  I like the view which is slightly less conventional.  Winter is probably a good time to do this since the sun is lower in the sky and the snow on the ground provides a bit more light on the underside avoiding the silhouettes more common in the summer.

wpid5614-AU0E6413.jpg

Navy Pier

wpid5549-AU0E5426.jpgOne of the nice things about winter in Chicago is enjoying the days when it is cold but clear and sunny. The combination of clear skies and the gentle light of winter is very attractive and when it happens during the weekend, it is a good idea to get out and have a walk around. Navy Pier is a very popular tourist destination so it is a place I rarely go. Winter, though, is a quieter time and it is worth wandering out since you won’t be fighting the crowds. You can also see how much ice has built up in the lake.

wpid5547-AU0E5403.jpgwpid5545-AU0E5399.jpg

 

 

 

 

 

 

The pier has a lot of touristy stuff to attract people. This isn’t really my thing. However, the Ferris wheel is something that makes me look for a little longer. Also, the end of the pier is the location for a large hall. I’m not sure what the hall is used for. It was locked up while I was there. However, it is a nice looking structure. It is also a nice spot to look out into the lake. The water culverts our outside the harbor wall and there is a lighthouse on the wall itself. A few things to take a look at while enjoying a good stroll.wpid5554-AU0E5436-Edit.jpg

 

New American Livery – Not That Bad

wpid5626-AU0E7638.jpgHaving heard a lot of comments about people’s views of the new livery American Airlines has adopted, I was reserving judgement until I had seen it myself. When I first saw images online, I was not bowled over with it but I was not appalled as some people seem to have been. Given the boring nature of many liveries these days, I thought it was a little different from the norm and certainly not cause for offense. Of course, there were plenty who thought the exact opposite.

I have now had my first chance to see it for myself and I have to say my opinion is much the same. I was lucky in this instance that I got to photograph it just before the sun went down so it was bathed in some very favorable light. Even so, I think it looked okay. You will make your own decision of course. In time, we will forget this discussion ever took place!

Back at the Hyatt

wpid5523-AU0E4830.jpgI wrote previously of a lift that took place at the Hyatt Regency Hotel in Chicago. Erickson undertook this lift with the massively powerful S-64. However, they did not manage to finish off all aspects of the lift and a follow up job was required. Since the largest items had already been dealt with and the remaining items were either light enough for a smaller helicopter or could be broken down into parts that were light enough, the remainder was contracted to Midwest Helicopter with an S-58T.

wpid5525-C59F4047.jpgwpid5537-C59F4279.jpgI was planning to join them on the roof but it turned out that the team contracting the lift had already got one of their guys on a neighboring roof taking some shots and I could join him. This roof was higher and up sun from the majority of the action so a great spot. I gratefully accepted their offer. (I should note that I also tried something new this time. However, it didn’t work out as planned. I should write about it here but I think I will get it working properly before I tell the full story. Everyone prefers a happy ending and I am no exception.)

wpid5532-C59F4248.jpgThe lift went well and I got a lot of shots (and some video of which more another day). The same problem as the previous lift affected things with the wind meaning the helicopter was tail on to me most of the time. However, this time it was more than compensated for by the scenic background and chance for some nice wider shots. I was happy with the outcome.

wpid5539-C59F4298.jpgwpid5535-C59F4260.jpg

Early Morning City

wpid5515-AU0E4822.jpgAs you know if you follow this blog, the chance to be on the roof of a building for a helicopter lift is also the chance to get some shots of the city. We get into place well ahead of the actual lift and, while the guys are getting ready to deal with the loads, I have the time to get my gear ready and usually grab some shots of the view. High buildings have good views but not always photogenic ones. When you are above the city, you get a good view of cooling units, satellite dishes and all of the others things architects and building engineers hide on the roof out of sight of most people.

wpid5519-C59F3887.jpgHowever, all is not bad. Sometimes you just get a great view of the city from an angle that most don’t get. Being on the river opens up more options too. You are not closed in by surrounding structures – and you have a river! Not bad, eh?wpid5517-C59F3884.jpg

Some Long Line Work

wpid5505-C59F3653.jpgIt has been a while since I was up on the roof with the Midwest Helicopter team. A couple of jobs came up recently on the same morning and I went along. It was a great morning with lovely winter light and good skies, at least to start out with. Of course, these conditions in the winter also can mean low temperatures. It was 14F on the first job – not the coldest I have experienced on one of these lifts but quite close! However, when benefit of living in Chicago for a number of years is that I do have suitable clothing for cold weather.

wpid5511-C59F3753.jpgThe first job was a relatively simple one. The building was not terribly tall, maybe a dozen floors or so, and there were three cooling units going up and one old one coming down. A previous job had been done by the team on this building but this one required some adjustments. The location where the units were to be placed was on the other side of the roof and a lot closer to a far higher building. The normal 100′ line would not suffice and the 300′ option was required. This is a far rarer requirement so Jim, the Chief Pilot, decided to fly it instead of one of the other pilots since he hadn’t any experience with the 300′ line.

wpid5509-C59F3729.jpgwpid5507-AU0E4788.jpgI had plenty of space up on the roof to move around to shoot while staying out of the way of the crew. My job is to avoid them and stay out from under the loads. I do think Jim sometimes is playing a game with me as, on this job like some before, I ended up tight in a corner as it seemed like he was aiming for me! In truth I was well clear and he wasn’t chasing me but when you are looking almost straight up at the loads, they do look like they are closer than they really are.

wpid5513-C59F3812.jpgThe only disappointment for me was that the wind was coming from the west so the aircraft was tail on for most of the time. Since the light was at its best this early in the morning, that was a shame. However, not a bad start to the day.

And the First Piece is Away!

As I mentioned before, the first piece was free.  I hadn’t planned for a time lapse.  I had no idea I was going to time my visit for when this happened, nor that it was going to happen so soon.  However, I was there with the camera on a tripod so I manually shot a sequence and cut it together.  It is short but you get the idea.  I left town shortly after this so missed the new section being put in place.  I shall hope to be around when the second span is worked on.

Cutting Through the Night

wpid5756-AU0E8296.jpgI headed back to the work site later the same day to see how things were progressing.  I wanted to know how fast things were moving but I also wanted to see the work at night.  The cutting torches they are using provide a great shower of sparks but, during the day, it is hard to make that impression since they are not very conspicuous.  If they were cutting at night, I figured the effect would be more pronounced.  That certainly was the case.

Moreover, they had got a lot further than I had expected.  The section was almost totally cut free.  It was now rest on the barge ready to be moved when the final cuts were made.  As you can see from above, it wasn’t long before this happened.  They really had made swift work of the first stage of the task.

Starting the removal

wpid5733-AU0E8100.jpgThe start of the bridge replacement program I mentioned here was swift.  One of the first things they did after getting the trains shut down was to open the span that wasn’t being worked on.  This provided room to move the barges around with their loads without obstruction.  Then the team got to work on cutting loose the section that is to be replaced.  There was plenty of structure to be cut free first before the main section could be removed.  Teams were busy cutting and removing all day.  The project is underway around the clock.  Some of the shots are in the gallery below.

Wells Street Bridge Prep

wpid5731-AU0E8097.jpgA major engineering activity is underway in the city at the moment.  The Chicago River is crossed by many bridges.  Most of them are bascule bridges and they are part of a cycle of maintenance with each bridge getting refurbished periodically.  Metalwork repair and repainting is usually the order of business but, sometimes, they need more significant work.  The Wells Street Bridge is undergoing just such a work program.  Part of it is being repaired but some of the metalwork needs replacement.

wpid5729-AU0E8085.jpgThis bridge is more complex than some.  It has two levels with street traffic on the lower level and the “L” on the upper level.  Replacement is, therefore, more problematic.  Shutting down a line on the “L” is not done lightly.  The street traffic is more easily diverted so, having that closed is easier to handle and it has been shut for a while now as the preparation for the repair was underway.  The bridge has two spans and they are being done one at a time.  The south span is first.  They have prepared the section that is remaining and now they are cutting off the rest.

wpid5727-AU0E8070.jpgA new span has been constructed offsite.  This is floated to the location, the old section is cut off and the new section bolted on.  That makes it sound so simple, doesn’t it?  It obviously is a little more complex, not least because it has to be done in just over a week including replacing the train tracks and electrical systems.  These shots show the site in preparation for the big task.  I will provide updates as the job progresses.  Sadly, I have to be out of town during some of the work but will show what I can.