Older jets were designed with some more brutal approaches to functionality. Modern fighters have a focus on fit, and finish and stealth/drag considerations will result in blemish free surfaces. The Buccaneer comes from a different generation. Wandering around then pair that were on show at Kemble, I did enjoy looking at the little details on these old jets. Here are some shots that caught my eye.
During the Buccaneer event that I went to at Kemble, we spent some time in an enclosure out near the taxiway. This would be good for the first part of the event, but I was out there quite a while before things were due to kick off. While hanging around, the purr of a Rolls Royce Merlin came to my ears and, downwind there was a Spitfire. It flew a nice curving approach and touched down before taxiing in quite close to where I was standing. It was a two-seat example and presumably had come to provide rides for some enthusiasts. I didn’t see it head back out, so I don’t know whether it was a brief visit or whether it did some rides and then left. Interesting markings on it, though.
The Buccaneer Aviation Group has charge of a couple of retired Blackburn Buccaneers that it looks after at Cotswold Airport at Kemble in Gloucestershire. They held an open day in April that included some taxiing of one of the jets and I decided this would be a good way to spend a spring Saturday. They were going to start up the jet, taxi it around on the ramp, run through a sequence of tests on the airframe and then go out to the runway for a fast run before returning to the ramp to shut down.
There would then be a break while they repositioned everything to their ramp where everyone would be able to spend some time up close with the planes and get pictures as required. The jet that was going to be taxied was one of the last Buccaneers built and is painted up in retro Royal Navy colours as worn by 809 Sqn jets when serving on Ark Royal before the carrier was retired. I don’t think this jet actually had any RN pedigree but that isn’t a big deal.
The second jet that they have is in the process of being prepped for painting in the standard RAF camouflage. Currently it is stripped back ready for paint, and I have to admit I found it rather cool looking with the random patterns that are visible. This will show in another post. The two jets were lined up together in front of the hangar to allow everyone to get their photos.
I was one of the first cars allowed through the gate to the second part of the day which meant I was able to get some images before everyone else showed up and it started getting busy. However, they did have a good level of organisation to it all so, after giving everyone some time to get up close, they pulled everyone back a bit to leave it unobscured for photos. I did notice some steps off to one side of the ramp and asked I they might be moved in to get a higher angle on things, fully assuming that wouldn’t be possible. I was wrong. They were more than happy to bring them in which made for a better angle on the shots.
The day had started out with some damp and windy conditions. It did rain a bit during the taxi section of the day. This was quite handy in that it made the grey paint look like it would on a carrier at sea, i.e. wet! It also showed up the blowing of the wing when they carried that out and resulted in a cool vortex in the inlet being visible. As the day progressed, the weather got a lot better. It was quite sunny by the time we were on the ramp with the jets.
The team were in no hurry to kick us out and, as the afternoon wore on, the number of people thinned out and the light got nicer. I hung around with a guy called Matt that I had met, and we were able to pass the time talking about planes, cameras and places. Finally, we were the only ones around and the crew started putting the jets away. The steps were still out so I was able to get a high angle as they pulled a jet beneath me. It was a tight fit, but it all worked out well. A top day out and many thanks to the tea baggers at TBAG.
There are many aircraft that the British aircraft industry produced in the middle to late 20th century that did not end up being terribly successful. There was the occasional commercial product in there but a lot that did not have large production numbers, even by the standards of the day. It was not unusual for the Royal Air Force to end up operating a few of these as the government of the day found a way to prop up an ailing manufacturer. One type like this was the Bristol Britannia.
A turboprop airliner, it was too large given that jets had taken over the market by the time it was coming into service. The Royal Air Force was the “willing” recipient of some of these airframes and, for transporting troops that didn’t have a choice in the matter, they were probably just fine. One of these airframes, Regulus, is not preserved at Cotswold Airport at Kemble in Gloucestershire. I didn’t know it was there until I was driving around the airport killing some time. It looks to be in great condition. I don’t know how well it is handling the corrosion risk that damp UK airfields offer but I hope it lasts a long time. There are a few of these around but not many.
I have posted a few shots of preserved aircraft at Kemble, but Cotswold Airport is the end of the line for a lot of planes in a far less graceful way. It is the base for disassembly of airframes that have reached the end of their operational lives. A jet doesn’t have to be that old to have greater value in its parts than as an operational aircraft. If a major check is coming up and it isn’t worth that much post check, it might be worth it to the owner to have it broken down for spares. As airframes get older, this decision is more obvious.
Kemble is the location where a lot of this happens. From the airfield or from the road that passes by, you can see a line up of aircraft that are unlikely to ever fly again. They will be progressively stripped of their most valuable parts. They may hang around like this for a long time with bits being gradually taken off as they are demanded by other operators. Eventually, there will be little left of value and the scrap metal will become the most valuable thing that they have to offer. Then they will be cut up. It is a safe process for an aviation enthusiast but a normal part of the life cycle of an aircraft. If you are in the area, head by to see what is there.