While walking along the main runway at BFI, the shorter runway remained in use. Since I was at the north end, that meant walking parallel to some of the movements. A Turbo Beaver was one of the planes to use the runway while I walked alongside so it would have been rude not to grab a few shots as it went by. I was using the M6 which is not my usual camera for action work but you go with what you have!
There is no shortage of DHC Beavers in the PNW, even of the turbine variety. Plenty of them are on floats, too, so even that doesn’t make it particularly special. However, when you haven’t been able to shoot much aviation for a long time, one is a welcome sight. Even better when it switches to the closer runway when on approach.
A couple of Kenmore Air planes departed from Kenmore while I was at Log Boom Park. The conditions were pretty damp and humid (and were about to be joined by pretty heavy downpours of rain!). This meant the departing planes had a good chance of pulling some streamers from the prop tips. Sure enough, when the Otter took off (and it started the takeoff run a little early which helped the shooting angles) the prop was streaming some vapor. The shape of the cone of the tip vortices as they flow across the fuselage was quite interesting.
A little while later (and just before the downpour began), a turbo Beaver came out. It, too, pulled some nice vapor from the prop tips as it accelerated across the water. A bit of a cross wind was apparently coming in (no doubt related to the impending storm) and they got airborne one float at a time. At this point we retreated to the car – but not in time to avoid the rain entirely!