The arrival of the balloon in Woodinville resulted in a previous post of the balloon flying in and another of the crew once the balloon was on the ground. I didn’t just shoot stills during the post landing time, though. I also decided to get a little video of the process of deflating the balloon. I was surprised how long it took but, while there is a large vent on the top of the balloon, once the envelope is lying on its side, the vent is no longer at the top and the air needs to be squeezed out. Here is the video I put together.
I posted about the hot air balloon over our town in this post. At the end of that post, the balloons was descending behind the trees for a landing and I was driving off to find them. It turned out that I had forgotten about a field between the rail tracks and the highway. I came around the corner and the ballon was on the ground but upright sitting in the field. It looked pretty incongruous.
I was clearly not the only person intrigued by this as a bunch of vehicles had gone down the normally quiet road alongside the field. The team was actually still burning as they maneuvered the ballon to the edge of the field to give themselves space to deflate it. Most people got bored with the view, but I decided to try and get photos and video of the whole sequence of deflating the balloon. The light was fading rapidly at this point.
A bunch of the crew grabbed the lines to the top of the balloon as the top vent was opened up. The balloon started to sag rapidly but, once they pulled it over to a certain point, the vent was too low to let the warm air out. Then they waited while another person gathered up the envelope and squeezed the remaining air out. Finally, it sagged to the ground and the final gathering up was quickly completed. By now it was quite dark, and I figured it was time to go home. I am not aware that they use the field to land normally. I wonder if this was a bit of an urgent landing as the light was fading fast and the low winds were limiting options.
Heading home on Sunday afternoon, I saw a hot air balloon overhead Woodinville. Passenger flights are a regular feature here but I was interested to see if I could work out where they were routing. I decided to follow them. I managed to get a couple of places where I could stop and get some shots as they flew above. One of these was not far from home. At this point, they seemed to be descending quickly. As they dropped below the trees, it was clear that they were landing. I wasn’t sure where this could be but jumped in the car again to see. Where they ended up. More to come…
My visit to the Albuquerque Balloon Fiesta was for an article I was going to write and, since I was there on a media pass, the organizers made a flight available. I didn’t know who I would be flying with until close to the time but the opportunity was one I was really excited about. When the time came, I was set up with a balloon crew from near Ottawa in Canada. The pilot spoke mainly French with very little English but we managed to find a way to communicate well anyway. Nancy was able to hang out with the ground crew.
I asked what I could do to help but they had things well sorted out and I was likely to be a hindrance rather than a help. Besides, it did mean I could photograph everything that was going on. The inflation of the envelope and then heating it up and getting it upright was great to see close up. Then it was time to climb onboard and await our designated takeoff time.
When the wind is blowing in a certain direction, the balloons will fly off towards the river and is is common for them to drop down to the water and touch it with the basket before lifting off again. I was hoping that this would be something we could do but the winds were not coming from that direction on this occasion. Instead, they were doing something that is not uncommon at Albuquerque but is actually really cool.
The field is aligned north to south and, when the wind is blowing the right way, something they call the box is formed. At about 1,000’ the wind is blowing north to south but, at about 2,000’ it reverses to south to north. Consequently, you can climb up to 1,000’ and head south for a while before climbing up to 2,000’ and reversing course. Once you get far enough north, you can descend and repeat the whole process.
Having never flown in a balloon before, I knew little about the process. You can’t see upwards because the envelope is above you. However, you can see sideways and down very clearly. Therefore, the balloon above is responsible for maintaining separation from any balloons below. We were all required to keep an eye on everything around is to be sure we stayed suitably separated. Looking directly down on balloons with the ground behind them was something I found really cool.
The other thing I wasn’t prepared for was how quiet it was. Sure, when the burner fires, the noise is loud. However, most of the time you are drifting along with the wind so there is no breeze and everything feels remarkably still. The main noise is other people’s burners or the conversation in the baskets nearest you. You can hear a lot of other chatter. It is a very peaceful experience and the views are lovely. No windows between you and the view so a totally immersive experience.
After making our way around the box a couple of times, it was time to land. Normally a balloon flight involves the ground crew tracking you across the sky and aiming to get to your landing zone when you do. Flying the box meant we were able to land about 50 yards from where we had taken off and they could just wait for us to come back. We drifted back down and touched down without any issues and it was time to jump out and let them deflate the envelope (which happened surprisingly quickly).
This is, so far, my first and only balloon flight. I would be very happy to do it again. I am not so sure that I would want to be in one of the large balloons that we see flying around here with big baskets to carry lots of passengers since that might feel slightly less relaxing but I would like to go again at some point.