Tag Archives: lift

Back at the Hyatt

wpid5523-AU0E4830.jpgI wrote previously of a lift that took place at the Hyatt Regency Hotel in Chicago. Erickson undertook this lift with the massively powerful S-64. However, they did not manage to finish off all aspects of the lift and a follow up job was required. Since the largest items had already been dealt with and the remaining items were either light enough for a smaller helicopter or could be broken down into parts that were light enough, the remainder was contracted to Midwest Helicopter with an S-58T.

wpid5525-C59F4047.jpgwpid5537-C59F4279.jpgI was planning to join them on the roof but it turned out that the team contracting the lift had already got one of their guys on a neighboring roof taking some shots and I could join him. This roof was higher and up sun from the majority of the action so a great spot. I gratefully accepted their offer. (I should note that I also tried something new this time. However, it didn’t work out as planned. I should write about it here but I think I will get it working properly before I tell the full story. Everyone prefers a happy ending and I am no exception.)

wpid5532-C59F4248.jpgThe lift went well and I got a lot of shots (and some video of which more another day). The same problem as the previous lift affected things with the wind meaning the helicopter was tail on to me most of the time. However, this time it was more than compensated for by the scenic background and chance for some nice wider shots. I was happy with the outcome.

wpid5539-C59F4298.jpgwpid5535-C59F4260.jpg

Some Long Line Work

wpid5505-C59F3653.jpgIt has been a while since I was up on the roof with the Midwest Helicopter team. A couple of jobs came up recently on the same morning and I went along. It was a great morning with lovely winter light and good skies, at least to start out with. Of course, these conditions in the winter also can mean low temperatures. It was 14F on the first job – not the coldest I have experienced on one of these lifts but quite close! However, when benefit of living in Chicago for a number of years is that I do have suitable clothing for cold weather.

wpid5511-C59F3753.jpgThe first job was a relatively simple one. The building was not terribly tall, maybe a dozen floors or so, and there were three cooling units going up and one old one coming down. A previous job had been done by the team on this building but this one required some adjustments. The location where the units were to be placed was on the other side of the roof and a lot closer to a far higher building. The normal 100′ line would not suffice and the 300′ option was required. This is a far rarer requirement so Jim, the Chief Pilot, decided to fly it instead of one of the other pilots since he hadn’t any experience with the 300′ line.

wpid5509-C59F3729.jpgwpid5507-AU0E4788.jpgI had plenty of space up on the roof to move around to shoot while staying out of the way of the crew. My job is to avoid them and stay out from under the loads. I do think Jim sometimes is playing a game with me as, on this job like some before, I ended up tight in a corner as it seemed like he was aiming for me! In truth I was well clear and he wasn’t chasing me but when you are looking almost straight up at the loads, they do look like they are closer than they really are.

wpid5513-C59F3812.jpgThe only disappointment for me was that the wind was coming from the west so the aircraft was tail on for most of the time. Since the light was at its best this early in the morning, that was a shame. However, not a bad start to the day.

Some Skycrane Footage

The arrival of Erickson in town to carry out a lift was described in a previous post which you can check out here. While I was predominantly shooting stills for this lift, I continue to grab some video footage when the opportunity presents itself. I have put together a short video of the lift and you can see it below.

The Mighty Skycrane

wpid5424-C59F3254.jpgRegular readers of this blog will know how much I enjoy shooting helicopter lift operations in the city. Midwest Helicopters are the local operator and a great bunch of people who have helped me out lots of times. This lift proved to be one of those times although it wasn’t them doing the job. They had finished a job in the city on a very snowy morning and I was exchanging messages with their Chief Pilot when he mentioned that Erickson were in town for a job.

wpid5418-AU0E4118.jpgErickson specialize in lifting very heavy equipment. Midwest fly Sikorsky S-58T aircraft which are good for about 4,500lbs. Construction Helicopters in Michigan (who have made appearances on this blog too) have S-58T aircraft as well but tend to bring S-61Ns to Chicago since they have a higher capacity of up to 8,000lbs so can lift loads too heavy for the local guys. Erickson are a different story altogether. They build and operate the S-64 which can lift a whopping 25,000lbs. This is obviously way above the capabilities of the other operators and way more than most jobs can justify.

wpid5422-C59F3220.jpgConsequently, an appearance by Erickson in town is not so common and is worthy of a look. Moreover, they were lifting just across the river from my home so how could I not go? I have worked on site with Erickson before and so contemplated calling to arrange to be there for this job. However, I was suffering with a bit of a cold and the weather forecast did not look promising so I decided to not try and be on site but to shoot from outside the safety perimeter. Since the lift was alongside the river, getting good shots should not prove to be difficult.

wpid5426-C59F3514.jpgCome the morning of the lift, visibility was terrible and snow was falling hard. All this could be seen from my window so I didn’t need to be out on the ground. Instead, I got ready at a leisurely pace and grabbed a couple of cameras when the weather started to improve. The streets around the Hyatt Regency hotel (the location of the job) had been closed for a while which I found curious since they obviously weren’t going to start until the weather cleared. Lifting in poor conditions is tricky enough but getting to the site in the first place is more of a problem.

wpid5420-AU0E4203.jpgAs the weather started to clear, I talked to one of the crews maiming the perimeter and he confirmed that they had launched and were on their way, Time to wait. The S-64 is a big beast and you don’t have any questions when it arrives. It’s sound travels well and you know it is coming. Fortunately, there were a bunch of loads to go up (and some to come down too), so there was plenty of opportunity to shoot at different locations. Moving across the river provided some alternative views of the lift. Meanwhile, the weather was continuing to improve until it was actually sunny. Sadly, the lifting location was always in shade but you can’t have everything. Watching the downwash blow the snow around both on the ground and on the roof was quite amusing.

wpid5428-C59F3612.jpgThe lift seemed to go well and I covered everything I was after. I also got some video which I shall share later.

On Top of the City

I have been very fortunate to be on top of some of the largest buildings in the city of Chicago in recent years.  Helicopter lifting operations take me to places that are off limits to many and that provide a great perspective on the city.  However, until recently, the highest point in the city was not one I had been to.  The top of the Sears Tower (I don’t know many that use its other name) had eluded me.  The Skydeck doesn’t count of course!

This changed with the installation of the new TV antenna for ABC on top of the building.  The good team at Construction Helicopters had been contracted to install the new antenna having helped removing the old one.  We gathered early one Sunday morning for the job to commence.  This is a location that is unmatched unless you are actually airborne.  I will post some views from on high in upcoming posts.  However, the first post is an aviation themed one – no great surprise for this blog!

The aircraft used was a Sikorsky S-61N.  The aircraft was leased from a Canadian company and was actually on its last job with Construction before being returned.  They have acquired a Super Puma which I hope to see in action at some point.  The S-61N is an old design but regular upgrades have kept it as a very capable machine.  It staged out of Midway and picked the loads from down at the bottom of the tower.  The vertical climb is quite a long one but they did well, not only in placing the loads, but holding them for some time while they were secured.  Good job to everyone involved.

Changing Your Name – Even if You Are a Building Pt 2

And so we progress to Part 2.  Attentive readers will already be aware that the Unitrin sign had been removed.  I was a lazy boy and watched from my living room.  The following weekend the new sign was scheduled to go up.  Fortunately, we had friends staying with us.  Mark is a flight test engineer and a pilot so the suggestion that some aviation action could be added to the weekend was good for him.  Since it was close to home, we wouldn’t be missed for a short while on a Sunday morning.

 

 

 

 

 

 

The replacement of the sign was pretty much the reverse of the previous week.  The letters and the logo had been assembled on the street on the back of trucks.  Two sides of the building had to be done and fortunately our side was to be first.  The placement of the signs was a touch more tricky than the removal.  Pulling them off meant getting them clear and dropping them down to the street.  Lifting the new ones up was complicated by the way in which the letters – which are large but don’t weigh much – can catch the wind and start to rotate.  The crews on the building have to catch the tag lines and then pull them steady before positioning them.

 

 

 

 

 

 

They soon got a good rhythm going and we watched the letters and the logo go up on the first side of the building.  We then retreated to further away as the other side was dealt with, not least because a lot of it was out of sight from the better locations.  Midwest did a great job as always and it was good to see the team.  Thanks everyone and Mark certainly was glad to see one of these jobs in person.

Changing Your Name – Even if You Are a Building Pt 1

This story comes in two parts (if the title didn’t give that away already!) and it is one that is a little bit of luck.  Regular readers know that I do a lot of jobs with Midwest Helicopters.  This was a job of theirs but not one that I was involved with.  However, it just happened to take place outside my window so I got to watch anyway.  There I was on a lazy Sunday morning (I was being lazy even if others obviously weren’t) catching up on a bit of TiVo viewing when a helicopter comes in to view out of my living room window.  Familiar shape and colors but what were they up to?

 

 

 

 

 

 

Turns out a building across the river from me was due to have its name changed.  The company had renamed from Unitrin to Kemper.  Unitrin was plastered on two sides of the building in large illuminated letters so they needed to come down.  The first week of the job was to take down the old letters.  I could have hurried outside and grabbed some shots but this was a lazy day (did I mention that before?) and so I just grabbed a camera and shot through the windows.

It was about an hour’s work to get the letters from each side of the building and drop them down to the truck on the street.  All of this from the comfort of my living room interspersed with a bit of Grand Prix watching!  Of course, if something comes down, there is probably something to replace it?  And so we shall progress to Part 2…

Thornton Quarry Video

The Thornton Quarry lift job with Midwest Helicopters was a full day job so it provided a bunch of opportunity to try different things.  This was true for the stills but it also allowed me to experiment with the video as well.  Since the aircraft was operating all day, I was able to get to multiple locations and see all aspects of the job as they happened.  Normally, this isn’t possible since a lift will only last about 30 minutes.  In that case, you have to pick the location that will get the shots you must have and accept that the alternative shots will not be made.

This time I was able to move around the whole site and capture as much as possible of what was going on.  Some of the clips looked really interesting and the time but they actually proved to be no use.  Some of the boring stuff as it appeared at the time actually ended up being really of use when it came to editing.

At this point, it is important for me to apologize to people like Gerry Holtz.  Gerry is an editor and he does this sort of thing for a living.  Anyone else who knows about editing professionally, you are all due my apologies and my respect.  I am trying a bit with video editing but what I have learned is that it is bloody difficult to do.

On this shoot, most of the video was captured using my SLR.  The rest of it was shot on a GoPro which is such a great little device to get something a little more unusual.  It was handheld (or mounted in the case of the GoPro).  No tripods or dollies and certainly nothing as impressive as a Kessler Crane!

I suspect that to be good at editing it is important to have had some education in the process.  I am doing it the guy way – try something and then try something else and see what happens.  Not even a manual to consult!  Consequently, I make some progress but probably my approach starts from the wrong place.  If I was going to do a lot more of this I would take the training aspect seriously.  However, for the time-being, this is a little side hobby so I will probably stick with what I am doing.

Part of the fun(?) of the edit process is taking all of the disparate elements of the footage and trying to combine them into a coherent timeline.  Part of the engineer in me thinks it should be delivered in the same order it happened.  This is rubbish of course.  The viewer has no concern of course.  As long as the result doesn’t obviously have terrible jumps or continuity issues, no-one is going to be any the wiser.

Also, how much do they need to see.  About eighty lifts were done during the day.  Does the video need to have eighty lifts?  NO!  In the end, I concluded that two lifts were enough to tell the story.  One wasn’t enough but it didn’t need more than two.  I cut the length down as I went but even then it was still quite a long piece.  A pro would probably have it down to a couple of minutes but then, as I mentioned, I am not a video pro.

One lesson I have learned as I have practiced this video stuff is how many of the tools the software has are no use at all.  There are a million transitions between scenes, all of which make it look like you are experimenting with the software but they are a distraction from viewing.  I have learned to use simple transitions that are short so they are not obvious to the viewer.  They just stop the jump being the item the viewer focuses on.

Anyway, the final part of this story is that I was very happy with the result for this video.  Unfortunately, it turns out the company that was doing part of the work is very sensitive about their equipment and doesn’t like the equipment being shown on the video so I have had to remove it from my YouTube channel.  Consequently, I can’t include it in this post.  Oh well…