Category Archives: corporate

Office Picture

wpid5220-AU0E0982.jpgI have been working in an office in Sacramento on a project for a while.  With the end of the year coming up, an office calendar is being put together.  The majority of the pictures in the calendar are from the team members and their activities throughout the year.  However, there was also a need for a group photo.  I was asked if I would take the shot.  I was happy to do it but I also am a little less happy taking pictures of people than I am when it comes to inanimate objects!

I took a couple of flashes along with me and a remote trigger.  However, I was not willing to find out whether the whole thing would work only when everyone was there.  Therefore, a little early setup was in order.  I had a couple of volunteers to help by standing in various places to see how the light was working out.  Initially it was not good with the spread of light not avoiding some harsh shadows.  A bit of tweaking improved things a bit.  When everyone arrived for the shot, the result was a little different but acceptable.  A few people still managed to get in shadows and the corners did not look as good as I would have liked but the team seemed happy with the result.  I shall have to work out how I would do it differently another time.  Not an area I work in a lot but one I would like to be better at.

A Rare Beast

wpid5121-C59F4307.jpgOver recent years I have made many trips that take me through Baltimore Washington International airport or BWI. It is the easiest route for me when heading to Washington DC. One of the nice things about BWI is that Northrop Grumman have a facility there that focuses on radar development. As part of this facility, they have a flight test department that makes use of some interesting aircraft. A few times I have seen one of them on the move while I was in the airport but normally I did not have a camera to hand to catch them. However, one time I did get lucky.

wpid5119-C59F4306.jpg

I managed to see their BAC 1-11 taxiing out for departure. This is an aircraft that has received a number of modifications for airborne testing of radar systems. While it is an old airframe and there aren’t many of them in service any more, it obviously still performs the required role well and they continue to operate it. It taxied past the terminal and then departed across in front of us. Since it is a bit dated, the noise levels were apparent even inside the terminal. However, it was fun to see it in action. A recent trip also spotted a smokey trail on approach. Sure enough, it was back. Sadly, no camera to hand that time!wpid5117-C59F4302.jpg

Another Jetstar Moment

A long time back (not that long if you think in geological terms), I wrote this piece about hunting down a Jetstar.  I won’t bore you with the details in case you read about it the first time.  If you didn’t and want to know, click on that link and you can find out more.  Anyway, I still get updates when any Jetstars are flying in the US so I know if they are coming close.  Normally, if they happen to be near me, the chances are that I am either already doing something or the weather is crappy (or both).

Recently, I got a morning email about a departure of the same jet as before from Midway.  I was free and the weather looked good.  Moreover, I still had time to get ready and get down to Midway before it was due off.  I decided to give it a go.  I needed to find a new location to shoot from so tried a couple of spots when I got there by checking out some of the other departures before settling on a location.  Next time I might try a different lens but the result overall wasn’t too bad.

Article In Progress

When you are first putting together a piece for a magazine, you don’t know exactly what sort of response you are going to get from the subject.  I am presently working on a piece about a manufacturer of business jets.  The magazine is getting well established so it should be a good amount of exposure for the company but you never know whether that is something they want or not.

When I contacted this company, I got a speedy response from their PR team which was great.  They provided responses to a series of questions I emailed to them but that is really only half of a story.  When writing questions, you think you have covered the main bases.  Then you get the responses and they trigger further questions.  In a face to face interview, this process also takes place but you get to deal with the back and forth immediately and the result should be a lot better as a result.

Consequently, with a little prodding, I managed to secure an interview with one of the board members of the company.  He arranged to meet me at one of their facilities that was conveniently located for me to get to.  When I got there, he immediately had to apologize that an aircraft closing was happening that morning and he couldn’t immediately be available.  This was really no big deal for me since I had made plenty of time available in case anything should mess up the schedule.  Selling aircraft is the business they are in so it isn’t hard to see that it should take preference over an interview.

In the mean time, one of the team was available to show me around the hangars.  I needed to get images of the aircraft in work to illustrate the piece and he was great at helping me get what I needed.  There were only two restrictions applied.  Registration numbers had to be obscured since customers owned the aircraft and some of the internal looms could not be shown.  This was fine by me and wasn’t going to limit the piece at all.

Aside from those rules, everything was made available.  Aircraft were powered up if I needed them.  Anything in the way or obscuring the shot was removed.  Gallery access was fine to get an overview of the hangars.  When I asked if anything was out on the ramp, I was told it wasn’t but if I wanted something, it would be put out there.  Fantastic cooperation and all provided with the friendliest attitudes.  Everyone I met in the hangar was very friendly.  They treated me the way they apparently treat visiting customers – shame I don’t have the cash to be a customer!

With the important things taken care of, it was possible to conduct the interview.  The person I was interviewing was very helpful and willing to discuss most things that I brought up.  One aspect of it was quite interesting from my point of view.  My idea of who I am is not necessarily the same as that of the interviewee.  I shall explain.  I am interested in the topic that I am writing about and I have a fair bit of experience in the subject so like to delve a little deeper into the subject.  I am interested in understanding but I am not trying to embarrass the company.  They will get a chance to review what we write to make sure we do not say anything untrue.

As far as they are concerned, I am a journalist who wants a story.  Will I try and make them look bad?  They don’t know.  The answers are all in line with the general message the company wants to portray.  This is perfectly reasonable.  However, it can mean that they are not going to give me the most frank answers to the questions or may avoid answering them altogether.  As we were talking, I found this a little odd.  It was only when I thought about it further afterwards that it made more sense.  They don’t know me, what my motives might be and they have a business to protect and promote.  I guess this is an example of my own inexperience in some aspects of this.

None of this should in anyway suggest that I wasn’t provided with the utmost cooperation.  The team were great and I hope they find the article both fair and interesting.  I wish them the best with their efforts and hope that we might get to work again some time.  Now to just get some images of the aircraft flying!

The Chase Yields Results

A few weeks ago during one of my many trips out of Midway, we were taxiing to the departure runway when we passed one of the FBOs on the field. Parked up ready to board was a Lockheed Jetstar. Not endangered perhaps but certainly a rarity. A mental note of the registration and I checked up on it when I got back on the ground.

Turns out this aircraft makes a regular appearance at Midway. Now to find a chance when we can both be in the same place. It doesn’t fly a huge amount so finding the chance would be the tricky thing. Not only must it be flying in to Midway, it must do it when I am in town, not tied up with other work and preferably when the weather is good.

An email alert told me that she was coming in today so all things were aligned.  I headed down to Midway and looked to find a spot to shoot from.  Midway allows you to get very close to the approaching aircraft but it is well developed and has an abundance of power lines so getting a clear shot is not that easy.

I arrived just in time to miss a very attractive Global Express that was landing.  Had I not originally gone to a bad spot, that would probably have been added to my shot list but never mind.  It did seem to be a busy time for corporate aircraft though.  In about 10 minutes, a Hawker 800 and a Cessna Soverign arrived, bracketing the arrival of my target.  Not too bad when you think about it.  Considering Midway is usually wall to wall Southwest 737s, this should be counted as a bit of a result.

The Hawker gave me an opportunity to check whether my lens choice was right.  The 70-200 was okay but perhaps a little short so, keeping an eye out for the imminent arrival, I swapped to the 100-400.  No drama this time and I was ready when the Jetstar came across the roof tops.

She is an interesting looking aircraft.  Certainly dated in her appearance, big fuel tanks on the wings and four engines mounted at the rear.  Not, perhaps, as graveful as some more modern aircraft but more interesting for being such a classic.

It is a brief moment as an aircraft passes by on approach so a rapid series of shots and then she was gone.  Originally, she had a flight plan filed for a departure half an hour later so I was ready to run to the other end to catch her again but this was cancelled.  Even so, a worthwhile expedition to catch a great looking aircraft.