Tag Archives: traction

Steam Powered Vehicles

During our first visit to Exbury Gardens, we happened to have chosen a day that coincided with a gathering of steam powered vehicles. While we didn’t change our plans for walking around the grounds to see them, we did encounter a load of them in the grounds. There was a steam powered car that a chap was driving around but the majority of them were miniature versions of the old-fashioned traction engines.

There wasn’t a chance that they were going to sneak up on you. Steam engines do tend to signal their approach even if the operator isn’t blowing the whistle. A blast from that will definitely get your attention. They were all planning to gather up at the house around 2pm and we didn’t go to see how many there were. However, while we might have been a fair distance away in the grounds, we could definitely hear them all when they were whistling together!

Socks For My Tires

The snow that stopped our trip to Cannon Beach was heavy over the hills and it required traction devices in order to be allowed on the road.  Since we didn’t have winter tires, I went shopping for some chains.  Unfortunately, they weren’t available in the size of my wheels and the clearances were not great.  However, I was introduced to something I had never heard of before.  They had chains, cables and socks.  I knew of chains, of course, and cables are just a version of chains but with (don’t be surprised) cables.  Socks are a more recent addition to the range.

They are a legal alternative and actually provide as good or better traction than chains.  They are a fabric covering for the tire.  One side has straps that go across the outside and an elasticated band is on the inside.  You hook them over the tire and pull down as much as you can and then roll the car forward half a turn to finish pulling them in to place.  Removal is the opposite.

They were actually pretty easy to use and, after a short bit of driving, I stopped to check them and they had actually self-aligned straightening out any unevenness.  They worked a treat.  Traction and braking were not a problem.  I was worried about their durability but maintaining the speed limit of 25mph for the 40 or so miles we drove caused no issues and they look just fine after removal.  I imagine that they don’t have the durability of chains so regular use would suggest chains as a better option but as an occasional requirement, they worked great.