I’ve taken so long to write this post that it has been expanded. I got an ABX 767 freighter coming in to SeaTac one time in overcast conditions. I had been meaning to write about it for a while but other topics had seemed more appropriate to cover first. Then, while out hunting for an MD-11F, I happened to have another example fly over me as I was parking up. (This one is an ABX jet but they are a common fleet.) The camera was to hand so I was able to get some shots for almost directly beneath. I guess this was the trigger for me to finally write the post!
The 787s fleeing the hurricane weren’t the only aircraft arriving at Paine Field while we were there. The regular schedule of 787 component deliveries was underway with the Dreamlifters. One of the jets landed just after we got there. We watched from the rooftop as it taxied in, the crew opened up the tail and a fuselage barrel section was offloaded. There was another Dreamlifter already parked up when we got there.
Once our tour was over, we headed back upstairs because this Dreamlifter was now ready to go. It pushed back and taxied out. I decided to try some video of it rather than more stills. The jet was off to Japan and was fueled up. Consequently, it used a good chunk of the runway to get airborne. I was watching through the camera and can admit to being a little surprised how long it ran. The video I got is below.
I was wandering along the runway at Concrete towards the end of the day during the fly in. A Robinson R44 had been doing pleasure flights throughout the day and was landing well up the field from where I spent a lot of my time. I had photographed it as it came over a couple of times but soon lost interest. However, as I wandered along, I happened to be near his landing spot when he came back from another trip. I was far better placed to get a shot or two so I did. However, he spotted me and, instead of following his normal approach routine, he brought the helicopter to a hover in front of me facing at me as they all looked at me while I looked at them. As long as I kept shooting, he didn’t go anywhere so eventually I just lowered the camera and waved. At that point he turned around and landed.
The first plane I ever flew in was a de Havilland Dragon Rapide. It was at a small air show at Bembridge on the Isle of Wight when I was a small lad. My Gran said I could have a ride in one of the planes. There was an Islander which was the one I really hoped for. It was six pounds for a ride while the Dragon Rapide was five pounds. Gran didn’t have a lot of cash so the Rapide it was. Now I am so happy that my first flight was in such a type.
Consequently, I was a little excited to see one at Skyfair carrying out some pleasure flights. It had recently been repainted in new colors and it flew some passes as well as the normal take offs and landings. I got plenty of shots of it. Now I am even more glad I did as the aircraft suffered an accident a few weeks later at Abbotsford. A number of people were injured including its owner and pilot, John Sessions.
In some of my photos, it appears as if John is staring right at us. The pilot position is right at the front of the aircraft and it quite exposed so it is no surprise that John was one of those injured in the accident since the cockpit appears to have taken the majority of the punishment. I wish him and all of those involved a speedy recovery.
With visitors in town, I took them to the Boeing factory tour at Everett. I know this might seem like I was doing this for my own benefit but I think they were happy to go and it helped to be doing something indoors on a rainy day. When we got there, we arrived in time to see a bunch of jets landing. There was a stream of them coming in it seemed and I was surprised to see that there were 787-10s coming in. The Dash 10 is not built at Everett. They are only assembled in Charleston so they wouldn’t normally be at Everett. Some Hainan 787-9s had also made the trip.
It turns out that they were evacuations from the impending hurricane. South Carolina was in the path of a major hurricane, Florence, heading towards the southeast coast of the US. Apparently, Boeing had decided to get the jets that were airworthy out of there to minimize the risk of damage. I suspect they would move more if they could but this was the best that they could do. The thing I found interesting was that they brought the jets all the way across the country and that there wasn’t somewhere closer that they could have as a refuge. Perhaps it is easier logistically to manage but it is a long flight to make.
I was walking along the trail that goes through the park next to the airport at Renton taking a look at the stored jets. There is a bridge across the river that is used by Boeing to move jets from the production areas to the flightline and, as I got close to the bridge, I could see the tractor hooking up to a China Southern 737-800 that had yet to be painted. They looked like they might bring it across the bridge. I figured I might linger and see what was up.
Sure enough, they started to pull the jet out and towards the bridge. I stayed out of the way but the wings of a 737 hang over the trail when they are moving it. This was not a problem so they were happy for me to stand there as the jet was moved out. I figured a little iPhone video was in order.
They pulled the jet onto a taxiway and left it there so I figured it might be heading out on a test flight. With the light now slightly to the other side, I chose to go back to the car and move to the overlook on the west side of the field. The jet was starting up but they clearly had a few things to run through so I had time.
They taxied to the south threshold which initially disappointed me. The wind had flight operations in the other direction which would have meant a takeoff towards us and into the light. Going the other way meant they would be airborne a long way away and heading over the lake. What I hadn’t figured on was, just like at Everett, they would do a run with an abort first prior to flying. They carried this out and were then at the north end of the field.
A turnaround at the far end of the field and they were soon lined up. A floatplane was flying about in the background as they got ready to take off. Then it was power on and rolling. There was a lot of crap in the foreground and this was a bit of an obstruction at the point of rotation but I was able to get some good shots as they got airborne and climbed out past us. The green primer/protective film was glinting in the sun. The flight will have ended at Boeing Field where I hope everything was trouble free.
Parked up on the ramp at Renton was what appeared to me to be a de Havilland Canada Beaver on floats. However, it looked different to every other Beaver I have seen. This one seemed to have a fun that was cut right down. Initially I figured it needed a repair but then I realized that there was a large dorsal extension to the fin. This would compensate to some extent to the missing top but whether it is a good configuration, I can’t say. It didn’t look good to me but it looked airworthy so maybe it flies fine? Has anyone seen more about this and can share with me some of the history?
Engine supply is a bit of a problem for the big two airliner manufacturers at the moment. Rolls powered 787s are going through a drawn out program of rework and A320neos are sitting around awaiting both Pratt and CFM engines. Boeing is also short of CFM Leaps and the result is a lot of parked 737 Max jets at Renton and Boeing Field. Apparently, they are flying jets to Boeing Field and then trucking the engines back to Renton. As I flew over Boeing Field earlier in the week, the flightline did look full!
I wanted to see all of these parked jets so took a trip to Renton one weekend to see how things were. There were certainly plenty of jets around and quite a few had ballast weights attached to the pylons. Supposedly the backlog will not be sorted out until the fourth quarter (although some think that is a bit optimistic)!
It was time to head home, so I checked in for my flight and headed to Delta’s lounge to await boarding. What I did not realize is that the lounge overlooks the flightline and mirrors the view from the viewing terrace. It was a crummy day with a typhoon approaching so not ideal for shooting and certainly not ideal for shooting through glass but, despite the occasional reflection, it was actually surprisingly good. The battery on the camera was on its last legs but why not get whatever you can.
The fun of a different city in a different country is the new airlines. Airlines I have heard of but not seen and airlines I have never heard of at all. They kindly would rotate quite close to where we were which was appreciated. The rainy conditions also meant that, while the lighting was pretty flat, there were vortices, spluff over the wings and inlet fogging to add some interest.
Having made the effort one lunchtime to go and see an Avanti, I was quite surprised to see another one taxi out at Paine Field during Skyfair. It was a different airframe and it looked rather special. A bit of the distinctive Avanti whine and it was on its way.
I’ve taken so long to write this post that it has been expanded. I got an ABX 767 freighter coming in to SeaTac one time in overcast conditions. I had been meaning to write about it for a while but other topics had seemed more appropriate to cover first. Then, while out hunting for an MD-11F, I happened to have another example fly over me as I was parking up. (This one is an ABX jet but they are a common fleet.) The camera was to hand so I was able to get some shots for almost directly beneath. I guess this was the trigger for me to finally write the post!
